LEAP Bridge Steel CONNECT Edition 18 Free Download [CRACKED]
LEAP Bridge Steel CONNECT Edition 18 Free Download ===> https://urluss.com/2tphNn
The Brooklyn Bridge is the southernmost of the four toll-free vehicular bridges connecting Manhattan Island and Long Island, with the Manhattan Bridge, the Williamsburg Bridge, and the Queensboro Bridge to the north. Only passenger vehicles and pedestrian and bicycle traffic are permitted. A major tourist attraction since its opening, the Brooklyn Bridge has become an icon of New York City. Over the years, the bridge has been used as the location of various stunts and performances, as well as several crimes and attacks. The Brooklyn Bridge has been designated a National Historic Landmark, a New York City landmark, and a National Historic Civil Engineering Landmark.
The first temporary wire was stretched between the towers on August 15, 1876,[103][112][113] using chrome steel provided by the Chrome Steel Company of Brooklyn.[103][113] The wire was then stretched back across the river, and the two ends were spliced to form a traveler, a lengthy loop of wire connecting the towers, which was driven by a 30 horsepower (22 kW) steam hoisting engine at ground level.[114] The wire was one of two that were used to create a temporary footbridge for workers while cable spinning was ongoing.[115] The next step was to send an engineer across the completed traveler wire in a boatswain's chair slung from the wire, to ensure it was safe enough. The bridge's master mechanic, E.F. Farrington, was selected for this task, and an estimated crowd of 10,000 people on both shores watched him cross.[116][117] A second traveler wire was then stretched across the span, a task that was completed by August 30.[118][115] The temporary footbridge, located some 60 feet (18 m) above the elevation of the future deck, was completed in February 1877.[119]
The superstructure is a galvanized pony truss with bolted connections. The use of bolted connections and full galvanization results in a structure that will be virtually maintenance free over its designed life. The use of bolted connections eliminates the fatigue concerns common with modern welded truss bridge systems and allows full galvanization of the truss.
l. The existing Camp Far West Hydroelectric Project operates to provide water during the irrigation season, generate power, and meet streamflow requirements for the Bear River. The existing project includes: (1) A 185-foot-high, 40-foot-wide, 2,070-foot-long, earth-filled main dam; (2) a 45-foot-high, 20-foot-wide, 1,060-foot-long, earth-filled south wing dam; (3) a 25-foot-high, 20-foot-wide, 1,460-foot-long, earth-filled north wing dam; (4) a 15-foot-high, 20-foot-wide, 1,450-foot-long, earth-filled north dike; (5) a 2,020-acre reservoir with a gross storage capacity of about 104,000 acre-feet at the normal maximum water surface elevation (NMWSE) of 300 feet; (6) an overflow spillway with a maximum design capacity of 106,500 cubic feet per second (cfs) at a reservoir elevation of 320 feet with a 15-foot-wide concrete approach apron, 300-foot-long ungated, ogee-type concrete structure, and a 77-foot-long downstream concrete chute with concrete sidewalls and a 302.5-foot single span steel-truss bridge across the spillway crest; (7) a 1,200-foot-long, unlined, rock channel that carries spill downstream to the Bear River; (8) a 22-foot-high, concrete, power intake tower with openings on three sides protected by steel trashracks; (9) a 25-foot-4-inch-high, concrete, intake tower with openings on three sides, each of which is protected by steel trashracks that receives water for the outlet works; (10) a 760-foot-long, 8-foot-diameter concrete tunnel through the left abutment of the main dam that conveys water from the power intake to the powerhouse; (11) a steel-reinforced, concrete powerhouse with a 6.8-megawatt, vertical-shaft, Francis-type turbine, which discharges to the Bear River at the base of the main dam; (12) a 350-foot-long, 48-inch-diameter steel pipe that conveys water from the intake structure to a valve chamber for the outlet works; (13) a 400-foot-long, 7.5-foot-diameter concrete-lined horseshoe tunnel that connects to the valve chamber to a 48-inch-diameter, Howell Bunger outlet valve with a capacity of 500 cfs that discharges directly into the Bear River; (14) a fenced switchyard adjacent to the powerhouse; (15) two recreation areas with campgrounds, day-use areas, boat ramps, restrooms, and sewage holding ponds; and (16) a recreational water system that includes two pumps in the reservoir that deliver water to a treatment facility that is piped to a 60,000-gallon storage tank to supply water to recreation facilities. The project has no transmission facilities. The estimated average annual generation (2010 to 2017) is 22,637 megawatt-hours. 1e1e36bf2d